Taizhou Huangyan JTP Mould CO.,Ltd.
located in Taizhou, Zhejiang Huangyan Xicheng Mould City, is specialized in
manufacturing all kinds of professional plastic injection mold manufacturer.
Provide customers with the development, manufacture one-stop service.
A thin wall cup mould construction:
Molds using engineering matrix structure, cavity and core selection of H13,
slide, slide guide, insert the use of 2316 or 718, guide post, guide sleeve,
gate set, pull the rod material, the use of reset rod SKD standard parts, mold
frame using a self-made standard mold. Good materials, corrosion resistance,
toughness, thermal conductivity and hardness, the polishing easier, thus saving
the production cycle, extend tool life, reduced maintenance and repair time,
reducing the risk of cracking, to improve the production efficiency.
Second, the plastic cap mould cooling system design:
Cooling system design is a relatively cumbersome work, that is, to consider the
cooling effect and the uniformity of cooling, the mold cooling system will have
to consider the overall structure of the cooling system to determine the
specific location and size; key positions such as the dynamic model or inserts
cooling; side of the slider and the side of the core cooling; cooling component
design and selection of standard components cooling. Our company started in the
mold design analysis of these series of questions, the use of recycled water
mold the way every part of the flow inside the mold, injection time to reduce
the cooling time and increase production efficiency and greatly reduce
Third, the thin wall cup mould maintenance:
Thin wall cup mold thin wall cup mold repair and maintenance than the more
important, more the number of mold maintenance, the shorter its life; and mold
maintenance, the better, its life will be longer. Mold maintenance is divided
1. Thin wall cup mold of routine maintenance: a variety of moving parts such as
the thimble, the line position, guide post, guide sleeve filling, mold surface
cleaning, transport, water, sparse Road, which is the mold to maintain the daily
2. Regular maintenance: Regular maintenance, including routine maintenance and
also pay to clean up the exhaust slot, plus trapped exhaust gas-burning black
level, damage, wear and tear parts of the correction;
3. Appearance and maintenance: mold base coating paint outside, so as not to
rust, the next model, the dynamic simulation model should be coated with
anti-rust oil, the mold should be stored tightly closed to prevent dust from
entering the cavity.
Fourth, after-sales service:
Thin wall cup mold when we shipped with a set of wearing parts, such as: mold
ejector, slider, tap, plug, etc. are configured, it is our free gift, other
parts, under normal circumstances do not have problems, we will gift a thin wall
cup mold maintenance manual for your convenience and better injection molding