TAIZHOU HUANGYAN JTP MOULD CO.,LTD. 
Home » News » Company News » How a Plastic Bucket Mold Made?

How a Plastic Bucket Mold Made?

Views:13     Author:Site Editor     Publish Time: 2018-09-18      Origin:Site

Plastic bucket mold is one of our most important plastic injection mold, our bucket mold includes thin wall bucket mold, food bucket mold, pail mold, cylinder bucket mold, square shape bucket mold,cuboid bucket mold, industrial use bucket and pail mold, water bucket mold, industrial paint bucket mold, fishing bucket mold, packing bucket mold, dustbin bucket mold,cement pail mold, plastic barrel mold and other bucket molds.


In order to produce high quality barrel mould, attention should be paid to the details of many links, and the most important of these is the following three points:


1. Bucket Mould Design and Structure

A high-quality mold structure is a premise for a qualified plastic bucket mold. We attach great importance to analyze mold structure, including demolding draft angle, the epitome of product surface, gating system design, exhaust design, cooling system design, etc.The main problems that may easily occur will through trial and error during the mold structure design.


2. Bucket Mould Material

In order to improve the mold life and product quality, we increase the mold steel hardness through heat treatment. The steels we commonly use are H13(48-52HRC), 2316(45-50HRC) etc.to prevent mold eccentric, we use whole piece of steel to make the bucket. The cooling system is very important. We adopt single loop cooling way and setup even distribution water channels as much as possible. All small sliders will be nitrided to increase the hardenss.


It is important to keep maintenance for the bucket moulds. We should check and make sure the the water channels and air circuit unlocked.


3. Bucket Mould Cooling system

Cooling system design is a relatively cumbersome work, namely to consider the uniformity of the cooling and the cooling effect, also the impact brings to the overall mold structure, determining the exact location and size of the cooling system; and cooling for key positions such as moving plate or the inserts, side sliders as well as side cores;standard cooling element design and the selection of the cooling standard components. 


JTP plastic mould analyzes all series of factors when begin to start the mold design. The plastic mould has recycled water to flow in every part of it which reduces the cooling time, improves the production efficiency and greatly reduces products costs.


If you have plastic mould demands or question, you can contact us at any time to explain your needs.


 We will be contact with you quickly, to study and discuss your mould requirements together.
Focus on Perfection on Quality
To Create Value For Customer

Product Category

Quick Links

Contact Info

Tel: 0086-576-84408990
Mob: 0086-18657601866
P.C. : 318020
E-mail: info@jtpmould.com
Fax: 0086-576-84407181
Skype: irinacn
Copyright © 2020 TAIZHOU HUANGYAN JTP MOULD CO.,LTD. All Rights Reserved.