What are medical moulds used for?

Our company is one of the leading plastic mold manufacturers and exporters in China, providing medical moulds to customers. We have advanced CAD/CAM/CAE design technology and rich experience in injection mold manufacturing for more than 15 years. The quality is up to international standard. In this article, we shall share a few concepts of the medical mould.

Here are the main points of the article:

What are the different types of medical moulds?

What helps ease the maintenance in medical mould manufactory?

How should the environment be like in the medical mould manufactory?

1. What are the different types of medical moulds?

We produce a large number of medical mould, such as test tube mold, petri dish mold, urine cup mold, tip mold and so on. The different types of medical moulds are listed below:

Injection centrifuge tube medical mould

Test tube medical mould

Disposable plastic injection container medical mould

16 cavities disposable plastic injection test tube medical mould

32 cavities disposable plastic injection test tube medical mould

Injection moulding medical container mould

Injection petri dish medical mould

2. What helps ease the maintenance in medical mould manufactory?

While you may think of stackable medical moulds, unscrewed or side cast techniques as complex, this does not mean that the manufacturer needs a complex, demanding set of maintenance requirements. In applications involving complex cylindrical or conical connectors, such as the pin holder for an insulin pen, the pin protection system allows for reliable and accurate centering of extremely thin cores and optimizes the reliability of the system. Since this solution also provides the ability to retrieve the entire core after the mold is opened, and to move the core to the injection site only after the clamping force is established, it prevents any risk of damage that may be caused by bending or even breaking. Making these cores, as well as the lower threaded cores, easy to simply handle and improve availability, directly from the rear injection medical mould to the injection molding machine, is made possible by a separate hot runner distributor design. The hot runner system is designed for specific applications.

3. How should the environment be like in the medical mould manufactory?

Like the industries they serve, medical moulds are operated in a highly regulated, high-quality environment, often producing products in clean rooms that require special air filtration systems. The decision to use a clean room depends on air cleanliness, which is a function of the size of particles in the air and the amount required in the manufacturing process. To ensure clean air, the cleanroom relies on a filter mounted on the ceiling, through which air enters the room and sweeps down to the bottom of the walls to the exhaust pipe near the floor. Air flows in layers, from top to bottom, and keeps particles floating in the air, causing pollution. Cleanrooms have different categories, each representing the size and number of particles allowed in a cubic meter of air. The level of the cleanroom also determines the frequency of complete ventilation. In a typical 25,000 square feet ISO 8 clean room, the volume of air throughout the room changes more than 20 times per hour. Of course, the filters need to be replaced, and clean rooms need to be cleaned regularly. Medical moulds operate according to strict documented procedures, describing these and other requirements.

From the article above, the types of medical moulds as well as the maintenance and environment of the medical mould factory is stated. Our company provides household mould and home appliances mould, for further purchase issues, contact us.